基于面向对象技术的柴油机在线状态监测系统设计

将软件设计中的面向对象思想扩展到系统设计中,针对柴油机实车运行在线监测中的变速变载及空间有限等问题,基于CAN总线的可靠性、信息传输的实时性和多主工作方式,设计分布式智能监测节点和上位机监控中心．分布式监测节点同步采集柴油机运行数据并进行降噪和简单特征提取后,将实时采样数据和在线监测结果上传至基于嵌入式PCI04的上位机监控中心,进行二次特征提取和智能模式识别,从而实现柴油机在线状态监测与故障预警和诊断．     

A case study in bio-inspired engineering design: defense applications of exoskeletal sensors

As part of a bio-inspired design process, the authors examine exoskeletal sensors found in insects and their potential application to armor and hardened buildings. In this way, the outer hardening of a structure or vehicle would not limit the ability of occupants to arrive at an actionable picture of the outer environment. To this end, various sensor modalities employed by insects are compared and contrasted with their current human-engineered equivalents. In several sensing modalities, biosensors perform better, are smaller, and more energy efficient than human-engineered equivalents. They note that biological designs tend to employ non-linear response to signal amplitude and respond with heightened sensitivity over a greater dynamic range of signals than human-engineered sensors. The insect biological sensors have structural and mechanical innovations that preserve the protective capacity of the exoskeleton.     

Dual‐ascent and primal heuristics for production‐assembly‐distribution system design

This article proposes two dual‐ascent algorithms and uses each in combination with a primal drop heuristic embedded within a branch and bound framework to solve the uncapacitated production assembly distribution system (i.e., supply chain) design problem, which is formulated as a mixed integer program. Computational results indicate that one approach, which combines primal drop and dual‐ascent heuristics, can solve instances within reasonable time and prescribes solutions with gaps between the primal and dual solution values that are less than 0.15%, an efficacy suiting it for actual large‐scale applications. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

消防给水系统设计审查及验收常见问题

消防给水系统是建筑给排水系统中的一个重要组成部分,是保障消防安全的基础设施.从消防设计审查的角度出发,提出消防给水设计中的常见问题以及设计中不太重视的消防排水问题;从消防验收的角度出发,列出消防工程验收过程中呈现的常见问题,以期引起重视.     

基于CC253O的烟雾传感器节点设计与实现

随着社会发展对消防安全的要求越来越高,实时地采集传输监测数据变得至关重要Ⅲ。本文针对现存的烟雾传感器节点可靠性差、准确率低、电路复杂,不易组网,并且在很多特定区域无法安装等问题,提出了基于CC2530的烟雾监测节点设计方案,并完成了以CC2530射频芯片为核心的烟雾传感器节点的硬、软件设计。实验测试证明,该节点满足无线消防监测系统的需要,具有高可靠性、低功耗以及低成本的特点,有着较好的应用前景。     

浅谈新课标下高中物理实验探究教学

在新课程改革中,新课标下的物理教材,更充分地体现出以学生为主体的原则。本文从开展探究性实验教学;实验教学引入不要拘泥于传统、强化实验创新设计等几方面阐述了如何在物理实验教学中培养学生的创新能力。     

利用径向力平衡飞行控制的航天器高精度轨道捕获方法

为实现对探测器轨道形状与高度的精准调整,提出一种径向力平衡飞行的航天器连续推力控制新方法。建立连续推力平衡飞行的动力学极坐标模型,并推导出特殊条件下的解析轨道解,进一步分析边值条件,给出连续推力的控制律。利用这一平衡飞行控制理论,构建轨道捕获的最优控制策略。考虑推力器的推力水平,通过一次或多次的控制过程,实现对轨道形状、轨道高度及轨道相位的综合调整。数值仿真表明:利用平衡飞行的轨道控制方法,配置微小推力器的空间引力波探测器可以实现高精度的轨道捕获;该方法具有控制过程可解析、计算量小、简便、实用等特点。     

地球静止轨道卫星系统兼容性多维度分析方法

针对地球静止轨道(Geostationary Satellite Orbit, GSO)卫星系统间的兼容性分析,设计了单波束和多波束GSO卫星系统间的上行及下行干扰场景,并在卫星的轨位、系统链路可用度及干扰系统地球站选址等多维度对GSO卫星系统间的干扰进行了评估,提出了不同轨位间隔条件下满足国际电信联盟干扰协调限值的干扰系统地球站最近选址的建议,细化了各维度研究上的颗粒度,在不同维度间进行横向对比,分析了GSO卫星系统在不同维度下的干扰变化特性曲线和各维度对干扰分析结果的影响程度。在系统链路可用度一定的条件下,两个卫星系统的轨位间隔>2°时,干扰数值变化缓慢;轨位间隔≤2°时,干扰数值变化较快;轨位间隔≤0.1°时,干扰数值急剧上升。以国际电信联盟实际登记的CHNSAT-81.5和INSAT-KA82.5E卫星的网络资料为例,将计算得到的GSO系统波束间的干扰噪声比、载波干扰比与Visualyse软件结果进行验证对比,结果误差保持在0.7 dB范围内,证明该方法具有有效的评估性能。     

空投设备气囊缓冲系统的缓冲特性分析与匹配方法

采用解析分析法,根据排气口流量方程和载荷运动方程建立了无量纲的空投设备气囊缓冲过程数学模型,并根据此模型构造了气囊的匹配设计图。讨论了排气口面积、气囊高度、着陆初速度、载荷质量、气囊底面积及排气口开启压力等参数对气囊缓冲性能的影响,提出了空投设备气囊缓冲系统的参数匹配设计方法,为空投设备气囊缓冲系统的匹配设计提供了技术支持。